915-603-5444
+1(915)603-5444
Warranty Information
This is a used item, in good condition and includes a 30 day warranty.
Description
Classification: Item(s) is used, sold as pictured, 30 Day Dead on Arrival (DOA) Warranty
Physical Condition: Good (Item looks presentable and has basic usage wear)
Alternative Part/Model Number: EMT 12500
Datasheet: http://www.emtech.dk/12500.htm
Specs: See Description
Product Details
SPECIFICATIONS | ||||
GENERAL | ||||
| INPUT VOLTAGE | 85 - 265 VAC | P/S CAPACITY | < 1,2 nF PRIM/SEC | |
| 120 - 375 VDC | ISOLATION | PRIM/SEC 3750 V | ||
| INPUT POWER | < 110VA | CREEPAGE | 8 mm | |
| FILTER | HIGH EFFICIENCY COMMON MODE | EMC | EN55022 - VDE 0871 | |
| SAFETY | IEC 950, EN 60950 | |||
| FUSE | T 2,0 A | PREFUSING | MAX 30 A | |
| INRUSH | < 20 A | DERATING | 0 - 50�° C NONE | |
| INPUT FREQ. | 45 - 65 Hz | MTBF | > 450.000 Hours | |
| PROTECTION | 275 VAC VARISTOR | OUTLINE | 100 x100 x 68 mm | |
| EFFICIENCY | 79 - 86 % | WEIGHT | APPR. 525 g | |
| FREQUENCY | Appr. 70 Khz | OPERATING | 0 - 55 �° C See FIG. 2 | |
| HOLD-UP TIME | > 20 mSec. | STORAGE | -40 - +85 �° C | |
OUTPUT | |||
| TYPE: | EMT12512 | EMT 12524 | EMT 12548 |
| VOLTAGE | +12 VDC | +24 VDC | +48 VDC |
| POWER | 100 W MAX | 125 W MAX | 125 W MAX |
| CURRENT LIMIT | 8,0 A See Curve FIG.3 | 5,2 A See Curve FIG.3 | 2,5 A See Curve FIG.3 |
| ADJUST RANGE | 11,8 - 13,8 VDC | 23,5 - 27,6 VDC | 47,0 - 55,2 VDC |
| RIPPLE | < 1,0 % | < 0,8 % | < 0,8 % |
| LOAD REG. | < 1,5 % | < 1,0 % | < 0,8 % |
| LINE REG. | < 0,1 % | < 0,1 % | < 0,1 % |
| PARALLEL OPR. | 80 % POWER SHARE | 90 % POWER SHARE | 90 % POWER SHARE |
| FACTORY ADJUST | 12,10 VDC +/-0,01V @ 0 A | 24,10 VDC +/-0,01V @ 0 A | 48,10 VDC +/-0,01V @ 0 A |
